Axis JS007WQK Installation Manual page 12

• Press or
press OK to enter the setting accordingly. When the icons turn red, press
or on menu for selection decreasing or adding. Press OK to exit the
menu. At the submenu, press MENU to return to main menu.
• If the channel is turned OFF, image of the corresponding camera will not
be shown in AUTOSCAN display mode.
• Setting scale of SCANTIME is 5-45S, the the step time of 5s.
6. Press or
• TIME: Press
selection decreasing or adding. Press OK to continue the setting when
finishing the previous operation.
• COLOUR-SYS: Press
Press or to select NTSC/PAL.
• AUTO-DIM: Press
or to select ON/OFF. When it is on, the monitor will automatically turn
darker when it is placed in a dark environment for 5s.
• ELECTRONIC DISTANCE LABEL: Press
DISTANCE LABEL and press OK to enter. Press
to open or close the elctronic distance label. When it is on, the electronic
distance label will be displayed in back channel.
to select CAM1/CAM2/CAM3/CAM4/SCANTIME and then
to select SYSTEM and press OK to enter.
or to select TIME and press OK to set. Press
or to select COLOUR-SYS and press OK to enter.
or to select AUTO-DIM and press OK to enter. Press
or to select ELECTRONIC
or
12
or
to select ON/OFF,
for