TCS-NET General Purpose Interface
4
Installation
TCB-IFCG1TLE (TCB-IFCG2TLE) Installation Method and
Orientation
There are five orientations of Surface/Wall Mount that the TCB-IFCG1TLE (TCB-IFCG2TLE) can be installed,
these are shown below.
NOTE
Use screws supplied for installation of device.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
Installation Space and Maintenance Space
A side space for connecting through cable inlets and an upper space for
maintenance must be reserved before installation.
The other sides can be adjacent to surrounding objects.
7-EN
– 8 –
Installation Manual
No good
100mm
100mm
100mm