Advertisement
LN INTERFACE
3
Before installation
Check the following package contents.
No.
1
LN interface
2
Installation Manual
3
Screw
Use the following wiring materials to connect the signal lines and power lines. (Locally procured)
No.
Line
1
For TCC-LINK
2
For L
W
®
ON
ORKS
3
For power
4
Installation
Installation method and orientation
There are five installation methods as
shown in the figure: surface mount and wall
mount.
Do not install the unit in any other
orientation.
Use the attached screws.
REQUIREMENT
Do not install the unit in any of the following places.
• Humid or wet place
• Dusty place
• Place exposed to direct sunlight or at a high temperature
• Place where there is a TV set or radio within one meter
• Place exposed to rain (outdoors, under eaves, etc.)
Installation space and maintenance space
A side space for connecting through cable inlets and an upper space for maintenance
must be reserved before installation.
The other sides can be adjacent to surrounding objects.
Item
Type
2-core shield wires
Wire size
AWG16 (1.25 mm
AWG14 (2.00 mm
Length
Type
Twisted pair shield cable (dedicated cable or equivalent)
Wire size
AWG21 (0.65 mm) × 1P
Free topology : 1600 ft (500 m) max. (total length)
Length
Bus topology : 3200 ft (1000 m) max.
Type
UL, CSA approved power supply wire
AWG18 (0.75 mm
Wire size
Quantity
1
1
4
5/32" x 0.47" (M4 x 12 mm) tapping screws
Description
2
), 3200 ft (1000 m) max.
2
), 6500 ft (2000 m) max.
2
), 160 ft (50 m) max.
Good
– 4 –
Installation Manual
Remarks
(total length including air conditioner
area)
No good
3.94"(100)
7.87"
(200)
EN
4-EN
Advertisement
