Terminal On Cradle; Batteries - Opticon PHL 2700 User Manual

U ' PHL2700
SER S MANUAL
2.5 INSTALLING, REPLACING
Wrong use of batteries might cause
serious damage
to the terminal or to the cradle.
In order to avoid damage
it is very important to take notice
of the instructions.
!
Insert full batteries before use of the
terminal.
!
Never remove the main battery pack
while the terminal is turned on.
Doing so can cause data in the terminal
to be deleted.
!
When you do not use the terminal for
a long time, take ALL batteries out.
To avoid battery leakage take the main
battery out when storing the terminal.
To maintain the capacity of the backup
battery take also the backup battery out
when storing the terminal.
10
/ IRU2700
TERMINAL CRADLE
!
Only use recommended batteries.
When other batteries are used, defects or
other problems can occur. Before installing
(new) batteries, please make sure you are
using the recommended batteries.
!
Do not make a mistake regarding the
polarity (+ , -) of the battery.
The terminal will not work when the
polarity is incorrect.
!
Use the right charger for batteries
Only the rechargeable Ni-MH battery
pack of Opticon can be charged inside
the terminal in the cradle IRU2700. Other
rechargeable batteries need to be
recharged in a separate battery charging
device.
!
Follow the instructions for installing,
changing and removing the batteries
very strictly.
The products are not warranted for
damage, defects, malfunction or loss of
data, resulting from incorrect use of

batteries.