Table of Contents
Advertisement
3. Align the golden contacts in the battery
compartment with the battery contacts
and push the battery down.
4. Slip the microSDHC card into the card
holder.
5. Replace the back cover.
Charging the Battery
Your phone's battery should have enough
power for the phone to turn on, find a signal,
and make a few calls. You should fully charge
the battery as soon as possible.
If the battery is low, there will be a pop-up
message on the screen. As you charge your
phone, the screen will show you the exact
battery level on the Status Bar.
WARNING! Use only ZTE-approved chargers
and cables. The use of unapproved accessories
could damage your phone or cause the
battery to explode.
1. Connect the adapter to the charging jack.
8
GETTING STARTED
2. Connect the charger to a standard AC power outlet. If the
phone is on, you'll see a charging icon, such as
in the Status Bar.
3. Disconnect the charger when the battery is fully charged.
NOTE: If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this case,
try again after charging the phone for at least 20 minutes.
Contact customer service if you still cannot power on the phone
after prolonged charging.
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-
Fi usage, and GPS functionality can drain your battery. You can
follow the helpful tips below to conserve your battery power:
•
Reduce the screen backlight time.
•
Lower the screen brightness.
•
Turn Wi-Fi, Bluetooth and auto-sync off when not in use.
•
Disable the GPS function when not in use. Most applications
using this function will periodically query the GPS satellites
for your current location; each query drains your battery.
•
Use the battery saver feature.
Powering Your Phone On/Off
•
Press and hold the Power key to turn on your phone.
•
To turn it off, press and hold the Power key to open the
options menu. Touch Power off.
GETTING STARTED
or
, appear
9
Advertisement
Table of Contents
