Using Wi-Fi Direct; Connecting To Bluetooth® Devices - Zte MAVEN 3 User Manual

Hide thumbs Also See for MAVEN 3:
Table of Contents

Advertisement

4. The WPS PIN number displays on the screen. Enter the PIN
into the access point's setup page.
After entering the PIN, your phone automatically finds the
access point and configures the connection.
NOTE: For detailed information about the WPS feature of the
access point, please refer to its documents.
Adjusting Advanced Wi-Fi Settings
1. From the home screen, touch
2. Slide the Wi-Fi switch to the On position.
3. Touch > Advanced to adjust the following settings.
Install certificates: Install certificates needed for
u
connecting to certain Wi-Fi networks.
Wi-Fi Direct: Use the Wi-Fi Direct feature. See Connecting
u
to Networks and Devices – Using Wi-Fi Direct.
WPS Push Button: Connect to a WPS network via the push
u
button method.
WPS Pin Entry: Connect to a WPS network via the phone
u
PIN method.
Connect to AT&T Wi-Fi spot: Slide the switch to enable or
u
disable automatic connection to an AT&T Wi-Fi spot when
one is available.
48
CONNECTING TO NETWORKS AND DEVICES
> Settings > Wi-Fi.
Using Wi-Fi Direct®
Wi-Fi Direct allows Wi-Fi devices to connect to each other
without the need for wireless access points (hotspots).
1. From the home screen, touch
2. If Wi-Fi is off, slide the Wi-Fi switch to the On position.
3. Touch > Advanced > Wi-Fi Direct. Your phone will search for
other devices enabled with Wi-Fi Direct connections.
4. Touch a device name under Peer devices to connect with
it. The other device will receive a Wi-Fi Direct connection
prompt and need to accept the request for connection. Both
devices may need to enter a common PIN. If prompted, touch
ACCEPT.
5. Once connected, the device is displayed as "Connected."
Connecting to Bluetooth® Devices
Bluetooth is a short-range wireless communication technology.
Phones or other devices with Bluetooth capabilities can
exchange information wirelessly within a distance of about 10
meters (30 feet). The Bluetooth devices must be paired before
the communication is performed.
CONNECTING TO NETWORKS AND DEVICES
> Settings > Wi-Fi.
49

Advertisement

Table of Contents
loading

Table of Contents