Advertisement
Battery charger modules
1
Notices
These instructions cover the installation of the D8132 Battery Charger and the D8132LT
Battery Charger Less Transformer modules in an alarm system supervised by a fire alarm
control panel (FACP), an intrusion alarm panel, or a combination Burglary/Fire control panel.
These modules are UL Listed for use in Central Station, Household Fire and Burglary Alarm,
Police Connection, and Electrically Actuated Transmitter applications. They can also be
installed as non-UL Listed , 12 V, 1 A, standalone power supplies.
To obtain any of the documents referenced in this document, download them from the Bosch
website (www.boschsecurity.com).
Install, test and maintain the module according to these instructions, NFPA codes, local codes,
and the authority having jurisdiction (AHJ). Failure to follow these instructions can result in
failure of a detector to initiate an alarm event. Bosch Security Systems, Inc. is not responsible
for improperly installed, tested or maintained devices.
Before installing the module, become familiar with the Installation and Operation Guide for the
control panel you are using.
Warning!
Follow these instructions to avoid personal injury and damage to equipment.
!
NFPA 72 requires that you perform a complete system wide functional test following any
modifications, repair, upgrades or adjustments made to the system's components, hardware,
wiring, programming and software/firmware.
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.
Trademarks
All hardware/software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
Bosch Security Systems, Inc.
Installation manual
Notices | en
3
2018.05 | 4.0 | F.01U.036.305
Advertisement
