Troubleshooting - Epson TM-J7200 series User Manual

English

Troubleshooting

(Error) LED is flashing or lit
❏ Check whether a paper jam has occurred. Remove any jammed paper. (
)
page 31
❏ Check whether the front cover/roll paper cover is closed. Close the cover if open. (
)
page 6
❏ Turn off the power, wait several seconds, and then turn it on again. If the error remains, contact qualified
service personnel.
Removing Jammed Paper
When a paper jam occurs, never pull out the paper forcibly. Open the cover and remove the jammed paper.
For roll paper:
1. Open the roll paper cover.
2. Remove the paper causing the paper jam.
3. Set the roll paper again and close the cover.
U "Removing Jammed Paper" on
"Front Side" on
U
31