Gpu Computing Card - NEC Express5800 System Configuration Manual

SYSTEM CONFIGURATION GUIDE
SAS
NOTE:

Please refer to the NEC Storage website for supported OS and device

For FC-SAN boot, please refer to "FC SAN Boot Configuration Guide"

For the cluster configuration, please refer to the Express Cluster website

Fibre Channel (FC) link speed varies by types and length of cables
7.5

GPU Computing Card

Product Name / Description
GPU Computing Card
NVIDIA Tesla P4
NOTE:

When installing N8105-51 GPU Computing Card, please select the following items.
- N8101-1285 High Performance CPU Heat sink Kit (In some CPU Processor kits, a high-performance CPU heat sink is attached
as standard)
- N8181-157 High Performance Fan Kit (In some Base Models, High Performance Fans are attached as standard)

When installing N8105-51 GPU Computing Card, please meet below items
- System memory under 1TB in total
- If you select RAID Controller, Low Profile Heat Sink type (N8103-192/-193/-194) is needed.
- Up to one N8105-51 GPU can be installed
- Operating under 35 degrees Celsius
- Optional drive cage is not supported
NEC Corporation
–
NEC Express5800/R120h-1M
Broadcom, LPe31000
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
- The controller is qualified with NEC Storage M series.
- The controller is not qualified with NEC Storage T series
Fibre Channel Controller (2ch)
Broadcom, LPe31002
16Gb/s, Optical, PCIe 3.0 x8
NOTE:
- The controller is qualified with NEC Storage M series.
- The controller is not qualified with NEC Storage T series
Fibre Channel Controller (1ch)
Broadcom, LPe32000
32Gb/s, Optical, PCIe 3.0 x8
NOTE:
- The controller is qualified with NEC Storage M series.
- The controller is not qualified with NEC Storage T series
Fibre Channel Controller (2ch)
Broadcom, LPe32002
32Gb/s, Optical, PCIe 3.0 x8
NOTE:
- The controller is qualified with NEC Storage M series
- The controller is not qualified with NEC Storage T series
SAS Controller
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0 x8
NOTE:
- Support tape connection via Device Expansion Unit only
SAS Controller
LSI SAS9300-8e Host Bus Adapter
12Gb/s SAS, ext. 8(SFF-8644 x2), PCIe 3.0(x8)
NOTE:
- Support for connection to NEC Storage T series and M series and LTO.
- The controller is not qualified with Tape drive connection via Device
Expansion Unit.
- Please download the driver kit from Express5800 web site
- This controller is an factory installation option. Select N8103-184 for the
field upgrade use after shipment.
Revision 7.0 – July 2018
N8190-164
N8190-171
N8190-172
N8103-197
N8103-E184
Part Number
N8105-51
25