NEC Express5800 System Configuration Manual page 47

SYSTEM CONFIGURATION GUIDE
3.0 November 22, 2017
.2.0 October 19, 2017
1.1 September 15, 2017
1.0 August 29, 2017
NEC Corporation
–
NEC Express5800/R120h-1M
● Updated the table of the Available Power Supplies
● SAS Expander supported SATA drives
● Information in References is updated
New products added:
● Xeon Gold 6144 Processor Kit / N8101-1147, N8101-1148
● Xeon Gold 6146 Processor Kit / N8181-1149, N8101-1150
● 3.84TB Hot Plug 2.5-inch SATA SSD / N8150-747
● 240GB Hot Plug 2.5-inch SATA SSD / N8150-739
● Dual Port 10GBASE-T Adapter / N8104-183
● Dual Port 10GBASE-T Adapter / N8104-184
● Slide Rail Kit for 1U-2.5" Server / N8143-127
● Slide Rail Kit for 1U-3.5" Server / N8143-128
Others:
● Added the table of guideline of the maximum power consumption
● Added VMware ESXi 6.5 to the list of operating system supported
● Updated OS support matrix
New products added:
● 4TB 7.2K Hot Plug 3.5-inchSAS HDD / N8150-561
● 8TB 7.2K Hot Plug 3.5-inchSAS HDD / N8150-562
● 10TB 7.2K Hot Plug 3.5-inchSAS HDD / N8150-563
● 150GB Non-hot-plug M.2 SATA SSD / N8150-778
● Fibre Channel Controller (1ch) / N8190-171
● Fibre Channel Controller (2ch) / N8190-172
Discontinued product deleted:
● 120GB Non-hot plug M.2 SATA SSD / N8150-754
Others:
● Updated the OS support matrix
● Updated Supported PCI Cards and Installable Slots matrix
● Added the table of maximum power consumption
Others:
● Added note when ordering M.2 SATA SSD
● Updated the table of available power supplies
● Corrected the type of processors with high performance heatsink as standard
Initial release
Revision 7.0 – July 2018
47