Table of Contents
Advertisement
System Date/Time
If the Update System Date/Time checkbox is selected, the date/time of the system
will be updated upon submission to the master device. There are two distinct ways of
controlling the date/time settings of the 8380 RPC system as follows:
PC (Auto) – This method retrieves the current date/time from the user's PC or
mobile device.
User (Manual) – This method allows the user to specify each individual parameter of
the date/time settings. The user may set the day of the week, day of month, month,
year, hours, minutes, and seconds.
Port Timeout (Hours)
If the Update Port Timeout (Hours) checkbox is selected, the port timeout of the
system will be updated upon submission to the master device.
The port timeout setting is used to control the automatic deactivation of all active ports.
The port timeout is adjusted by selecting the number of hours (0 for no timeout, 1 to 72,
default of 24) from the dropdown list.
This parameter does not imply that all active ports deactivate at the same time, but they
will remain active for the same amount of time before automatically deactivating.
Page 44
8380 RPC User's Guide
Document Num., Rev. 3
May 2018
Advertisement
Table of Contents
