Adding And Removing Ports - Viavi 8380 RPC User Manual

Adding and Removing Ports

Addition
Each individual port of each device on the 8380 RPC system can be added by
selecting the checkbox next to the port name field under the Display column.
Note that adding a port to the 8380 RPC system does not mean that the port is
active. Before the new port can be accessed, the corresponding device must be
added to the 8380 RPC system.
Removal
Each individual port of each device may be removed from the 8380 RPC system by
deselecting the checkbox next to the port name field.
Once the port has been removed, the master will automatically deactivate the port if
necessary.
Removing a master port prevents the corresponding slave device from being
accessed from the Select Ports page, and it automatically removes the slave
device from the 8380 RPC system. Also, all active slave ports for the device will
automatically deactivate upon removal of the master port.
8380 RPC User's Guide
Page 42 Document Num., Rev. 3 May 2018