Upgrading Slave Unit Firmware - Viavi 8380 RPC User Manual

7. The 8380 RPC will now automatically reboot. Once this has occurred, reconnect to
the unit as an 8380 RPC slave unit and then select Download. This will start the slave
control unit firmware upgrade.
8. When the upgrade is complete, the status will be shown in the event table at the bottom
of the window.

Upgrading Slave Unit Firmware

Perform the following steps to upgrade the firmware in an 8380 RPC slave unit:
1. Connect to the 8380 RPC as a
slave unit.
2. Select the ... button and the
Open dialog will appear.
3. From the Open dialog, select the
appropriate firmware file and then
select Open.
4. The name of the firmware file will be displayed. To send the selected firmware file to
the 8380 RPC, select Download.
5. The status bar at the bottom of the window will show the progress of the firmware
upgrade as shown in the following image.
6. When the upgrade is complete, the status will be shown in the event table at the
bottom of the window.
Page 34
8380 RPC User's Guide
Document Num., Rev. 3 May 2018