Network Settings (Master Units Only) - Viavi 8380 RPC User Manual

Network Settings (Master Units Only)

Select the Network Settings tab to edit the current network configuration of the master 8380
RPC unit. This tab is not used when connected to an 8380 RPC slave unit.
Select the Get Network Configuration button to retrieve the current network configuration
from the connected 8380 RPC master unit. The current settings will populate the Current
Network Configuration table and the Network Configuration fields.
To change the network configuration, enter the new IP Address, Subnet, and/or Gateway
and then select the Update Network Configuration button. The new settings will populate the
Current Network Configuration table.
The default settings are the following:
IP Address: 10.1.61.90
Subnet: 255.255.0.0
Gateway: 10.1.1.1
May 2018
8380 RPC User's Guide
Document Num., Rev. 3 Page 31