Advertisement
Preparation:
Before starting up the tool, read the operating instructions first.
All current-carrying elements in the area you are working in should be disconnected.
Otherwise the protective procedures for working in the vicinity of components under current
must be implemented. (DIN EN 50110)
Do not use the tool if you are tired or under the influence of medication, drugs or alcohol.
Take into account the valid accident prevention and safety regulations and use the tool
exclusively for the purpose for which it is intended.
Only electro-technically trained persons over 16 years of age may process connecting
materials using the tool.
The operating instructions must always be carried with the tool.
The instructions must have been read and understood by the user.
The operator must ensure that this is the case.
Start:
• The device has a manual return that brings the piston back to the starting point when the
maximum pressing force has been achieved.
• The pressing head can be infinitely rotated by 360° about the longitudinal axis. This
enables mounting even in difficult to access locations.
• The pressing head has centring pins which ensure automatic centring of the connection
material in the pressing head.
Thorn pressing
Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Pushbutton
to advance
Pushbutton for
return movement
... convincing solutions
Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid.
english
Advertisement
