Photron FASTCAM User Manual page 11

3．Mounting on high speed camera
•
An SD memory card can be inserted into the camera body regardless of the power supply
status, ON or OFF (hot-swappable). However, do not even attempt to remove it during data
writing.
•
LED turns on/off or blinks as follows according to the existence/recognition status of inserted
SD card.
Status
No SD memory card
SD memory card recognized
Writing data
Error found
•
When an error occurs and LED turns on red, it can be reset by pushing the button on the
remote controller.
•
If the inserted SD memory card is pulled out during data writing (with LED blink red), the data
being written in may be broken.
LED
Off
Turns on green
Blinks red
Turns on red
5 SD MemoryCard User's Manual