Storage - RIDGID TS 2400 Operator's Manual

Blade Guard Storage
Holds the blade guard when making non-
thru cuts and transporting saw. Slide
blade guard in as shown. Snap bottom
edge of clear basket between latches on
base.
Wrench/Blade Storage
Conveniently stores arbor wrenches as
well as an extra sawblade. Secure
wrenches and sawblade with blade stor-
age washer and wing nut. Extra washers
are provided to separate blades and pre-
vent tooth damage.
Rip Fence Storage
Securely holds the rip fence when it is not
being used. To insert, place the top edge
in first and twist upward to snap in place.
To remove pull up on fence and rotate
bottom away from saw.
Miter Gauge Storage
Provides convenient storage for the miter
gauge when it is not being used. Slide
miter gauge in place as shown. To
remove miter gauge release latch and lift
straight up.
19
Guard
Latches
Blade
Wrench
Wing Nut
Fence
Latch
Miter Gauge