Kinesis Freestyle VIP3 Pro Quick Start Manual

Introduction
The VIP3 Pro is designed to enable
adjustable tenting of your Freestyle
Pro keyboard. The VIP3 Pro can be
adjusted to provide tenting angles of
o o o,
5 , 10 , or 15 and each side of the
keyboard can be set independently to
suit your preferences. The tenting
angle is easy to adjust without
detaching the VIP3 Pro from the
keyboard.
What is Tenting?
"Tenting" is the elevation of the center portion of a split keyboard. By raising your thumbs, your forearm
muscles become relaxed, resulting in significantly improved comfort and blood flow. The palm supports
included in the kit further improve relaxation of forearm, neck and shoulder muscles.
VIP3 Pro Contents
Each VIP3 Pro kit contains a pair of left and right palm supports,
replaceable self-adhesive palm pads, and and left and right "v-lifters"
which mount to the underside of the keyboard once the palm supports
are installed. Each v-lifter can produce three reproducible tenting angles
without any additional accessories.
NOTE: The v-lifters and palm supports are not interchangeable. For stable
operation, the left v-lifter and left palm support must be installed on the left key
module and vice versa.
Installing VIP3 Pro
1. Disconnect keyboard: Unplug the keyboard or shut down your
computer to avoid accidentally pressing any keys.
2. Install Palm Supports: The palm supports must be installed prior
to installing the v-lifters. Identify the left and right palm support by
using the legend engraved on the underside of the palm support.
Match the correct palm support to the appropriate key module, then
place both key modules and palm supports upside down on a flat
surface.
Slide each palm support towards its key module to engage the three
mounting tabs in their prospective slots (arrows).
If the palm supports don't slide on smoothly and allow the two locking
loops to engage, confirm you are using the correct (right or left) palm
support.

Quick Start Guide

Freestyle VIP3 Pro Accessory Kit (AC920)
Compatible with Freestyle Pro & Edge Keyboards
VIP3 Pro kit installed on Freestyle Pro keyboard, 10 degree tenting shown.
VIP3 Pro kit contents
Installing palm supports
Mounting Tabs