These instructions apply to the base Advantage360 model feature the SmartSet Programming Engine. If you have the Professional model with the ZMK engine stop reading and visit https://kinesis-ergo.com/support/ adv360-pro. 2.0 Direct Programming Overview The Advantage360 has 9 customizable Profiles which comprise 9 sets of layouts and lighting configurations.
Page 4
3.5 Firmware update may be required Some of the features described in this guide may require a firmware update. Download firmware and get installation instructions here: https://kinesis-ergo.com/support/adv360/#firmware-updates 4.0 Direct Programming Layouts The 360 features 9 configurable Profiles, each with its own corresponding “layout” (1-9). The nine default layouts are saved as separate .txt files in the “layouts”...
Page 5
4.3 Layout Programming Tips If the keyboard cannot understand the desired remap, then the default action will remain in effect. • • Do not mix and match square and curly brackets in a single line of code Separate each line of code with Enter/Return •...
Page 6
Macro Examples: 1. Pause key performs “Hi” with a capital H: {pause}{rctrl}>{-lshft}{h}{+lshft}{i} 2. Hotkey 4 + Left Ctrl performs “qwerty” at speed 9: {lctrl}{hk4}>{s9}{q}{w}{e}{r}{t}{y} 3. Hotkey 1 increases the volume 3 notches: {hk1}>{x3}{vol+) 4.8 Tap and Hold Actions With Tap and Hold, you can assign two unique actions to a single key based on the duration of the keypress. Designate the Position Token in the appropriate layer, then the Tap action, then the timing delay from 1 to 999 milliseconds using the special Tap and Hold token ({t&hxxx}), then the Hold Action.
• Caps Lock (On/Off): [caps] Num Lock (On/Off): [nmlk] • Scroll Lock (On/Off): [sclk] • • Active Layer: Base: [layd] • Keypad: [layk] • Fn: [lay1] • Fn2: [lay2] • • Fn3: [lay] 5.3 Define your Color(s) With the exception of Layer, each function can be assigned a single color value using a 9 digit value corresponding the R-G-B value of the desired color (0-255).