Advertisement
5141 POMMEL HORSE
2. Adjustment instructions
2.1. Height Adjustment
1. Have 2 people support the Horse Top from both ends.
2. Loosen both Locking Handles and pull the Snap Locks. (See Fig. 3)
The Horse Top has the potential to drop at this stage. Injury can occur as a result of this
dropping. Stay well clear of the Adjusting Tubes!
3. When the desired height is reached (FIG height is 115 cm at notch marked '3'), release the
Snap Locks and ensure they are fully engage in an adjusting tube notch. Firmly tighten both
Locking Handles.
2.2. Pommel Width Adjustment
1. Loosen the Cam Lock Handle (See Fig. 4)
2. Slide the Pommel Handles to the desired width. They can be adjusted from 40 cm to 45 cm wide.
3. Thread on Cam Lock Handle so when handle is closed, it does tighten the pommels (Fig. 4).
This device will not be sufficiently stable unless the Locking Handles, Snap Locks and
the Cam Lock Handle are properly secured!
3. Maintenance
•
At every use, check mechanical parts for signs of wear, damage or any loose components.
Also inspect the Horse Top surface for signs of wear.
•
At every use, check that the horse is leveled and stable.
•
Periodically check welds for signs of damage or fatigue.
Page 8 of 9
Assembly Instructions
Advertisement
