Advertisement
5141 POMMEL HORSE
1. Assembly Instructions
1.1. Layout of Area Required for the Pommel Horse
1.2. Assembly
1. Remove the Pedestal Base from its carton and set it on the floor. Ensure it is leveled.
2. Attach the Uprights Posts as shown below, using the three flat head screws for each post.
If required, square the upright posts using a level on the side of the posts, using the set
screws found on the base of the upright posts.
Upright
Posts
Page 3 of 9
90 Deg
90 Deg
Figure 1 – Pedestal Base
Assembly Instructions
Locking
Handles
Upright Base
with flat head
screws
Advertisement
