5141 POMMEL HORSE
Assembly Instructions
9. Check to ensure that both Adjusting Tubes are locked at the same height.
10. Shake the Horse Top from the middle to center the body on the Adjusting Shafts.
11.
FULLY TIGHTEN THE MOUNTING PLATES ASSEMBLED IN STEP 6.
12. Assemble the Pommel Handles to the Horse Top as shown on next page. Adjust to the desired
width and tighten the Pommel Wing Nuts securely (Fig. 4).
Horse Top
Adjusting Tubes
Locking Handle
Snap Lock
Pedestal
Upright & Base
Adjustable Feet
Figure 3 – Pommel Horse Full Assembly
Page 5 of 9