Advertisement
5141 POMMEL HORSE
1.3. Mounting the Pommels
1. Place long pommel screws through the pommels and then into the holes on top of the pommel
horse (Fig. 4).
2. Thread on Cam Lock Handle so when handle is closed, it does tighten the pommels.
Pommel Screw
1.4. Anchoring Instructions
To increase the stability of the pommel horse, a Floor Anchor (1/2" Thread Recommended) can be
used in the center of the base.
1. Select a permanent location for the Pommel Horse that is flat and stable.
2. Mark the hole location by placing a marker through the center hole in the base plate.
3. Slide Pommel Horse out of the way and install the Floor Anchor using the instructions on the next
page of this manual.
The Concrete Floor Anchor is not supplied with this package. They must be purchased
separately. Concrete anchors are available at SA Sport under spare part #PEA1 (Set of 4
pieces).
Page 6 of 9
Figure 4 – Mounting the Pommels
Assembly Instructions
Cam Lock Handle in the
locked position
Advertisement
