Table of Contents
Advertisement
I
t
e
m
I
t
e
m
Local Address
Control Panel
The following buttons appear at the bottom of each configuration page:
I
t
e
m
I
t
e
m
Apply
Save your changes. If you restart your Gateway without saving your
changes, all of your changes are lost. After the device restarts, the
last saved configuration is used.
Undo
Clear your changes on the current page and return to the main
menu. After you click Apply, Undo does not clear your changes.
Next
Confirm the current setting and move on to the next one.
Back
Want to revise the previous setting.
Refresh
Update to the new configurations and settings.
Auto Refresh
Update automatically without needing you to refresh repeatly.
Wizard
Start Setup Wizard manually if your BLADE did not run the setup
program automatically.
Restart BLADE
Star Sign
Note: Illustrations in this manual containing an image of what you see on your
computer screen are for reference purposes only. Values shown in the illustrations
in this manual may be different from what you see on your computer screen.
Display the IP address and netmask address in local network.
Manage the device software. Click Browse button to locate the
software package on your computer. Then click upgrade
button to upgrade the softare to the device.
C
l
i
c
k
T
o
C
l
i
c
k
T
o
C
l
i
c
k
T
o
C
l
i
c
k
T
o
14
Advertisement
Table of Contents
