Table of Contents
Advertisement
4. Procedure to Log into the WiMAX Wireless
Broadband (BLADE Series)
Your Internet browser should support JavaScript.
B
e
f
o
r
e
y
o
u
B
B
e
f
o
r
e
y
o
u
B
e
f
o
r
e
y
o
u
Ensure that your service provider has registered your unit.
One of following two types of protocols are used to connect the unit to
the provider's network. Your system service provider determines the
method to use.
Ensure that you know which protocol you will need to enter in the Setup
Wizard procedure, either EAP-TLS, or EAP-TTLS. If EAP-TTLS is to be used, the
service provider will give you a Username and Password. Some settings on
your computer must be verified or changed to ensure that your computer
configuration can support the Wireless Broadband BLADE.
Verify that the IP addresses and DNS settings are automatically generated
in your Local Area connection of your Internet Protocol (TCP/IP) properties.
The procedure to verify your computer's configuration is found in the
section titled "Configuring TCP/IP" on Chapter 11. Use the appropriate
procedure for your computer.
Use the following procedure to log into the WiMAX Wireless Broadband BLADE.
1
On a computer that is connected to the BLADE, open a web browser.
2
In the Address or Location field, type http://192.168.15.1 and press ENTER to display
the login screen.
3
There is no Username field, just type the password (default password is motorola)
e
g
i
n
C
o
n
f
i
g
B
e
g
i
n
C
o
n
f
i
g
B
e
g
i
n
C
o
n
f
i
g
u
r
a
t
i
o
n
u
r
a
t
i
o
n
u
r
a
t
i
o
n
15
Advertisement
Table of Contents
