Related Manuals for Delmhorst Instrument Co QuickNav 12545
Summary of Contents for Delmhorst Instrument Co QuickNav 12545
- Page 1 QuickNav MOISTURE METER Owner’s Manual Version 2.01 For Meters starting with Serial # 12545 Delmhorst Instrument Co. Rev 4 May, 2014 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
-
Page 2: Table Of Contents
EIFS 9-10 TESTING CONCRETE 10-11 TESTING INSULATION TESTING DRYWALL CARE OF YOUR METER SERVICE FOR YOUR METER WARRANTY SPECIES CORRECTION TABLE 16-17 Copyright 2014, Delmhorst Instrument Co. Page 2 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 3: General Description & Features
GENERAL DESCRIPTION & FEATURES Thank you for your purchase of Delmhorst Instrument Co’s newly designed QuickNav handheld moisture meter. The QuickNav offers the latest in features and functionality, and is intuitive and easy to operate. We recommend that you read the following pages in detail to take full advantage of all that the QuickNav has to offer. -
Page 4: Operating Instructions
NOTE: Current meter settings are not lost during battery replacement or low battery conditions. Copyright 2014, Delmhorst Instrument Co. Page 4 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 5: To Power The Meter On
3. Push the contact pins into material to be tested. Any Delmhorst electrode may also be used in WOOD mode by simply attaching it to the connector on top of the meter. Copyright 2014, Delmhorst Instrument Co. Page 5 of 17 GlobalTestSupply www. -
Page 6: To Take Drywall Readings
key to highlight SCAN. Then, use the SELECT 1. From the Main Menu, use the key to enter the SCAN mode. 2. The meter will display the SCAN screen, as shown below: Copyright 2014, Delmhorst Instrument Co. Page 6 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 7: To Take Scan Readings
ALARM. Press the SELECT key to enter the alarm sub menu. 2. The default status of all alarms is “OFF.” Press the HOLD (SELECT) key on the desired alarm to turn it on. Copyright 2014, Delmhorst Instrument Co. Page 7 of 17 GlobalTestSupply www. -
Page 8: To Set The Alarm In Wood, Drywall, Scan Mode
METRIC will change the units used to metric. Pressing the SELECT key on this option when displayed as IMPERIAL will change the units used to imperial. OFF: This menu option will power down the meter. Copyright 2014, Delmhorst Instrument Co. Page 8 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... -
Page 9: Taking A Reading - Practical Applications
When used on materials other than wood, the meter’s PIN mode will give relative readings only, not %MC. The numbers displayed Copyright 2014, Delmhorst Instrument Co. Page 9 of 17 GlobalTestSupply www. -
Page 10: Testing Concrete
When the slab is covered and the upward movement of moisture continues, moisture will move into a hygroscopic (wood) floor, or build-up pressure under a non-breathing synthetic floor, causing delamination. Copyright 2014, Delmhorst Instrument Co. Page 10 of 17 GlobalTestSupply www. -
Page 11: Testing Insulation
PIN mode will give relative readings only. Establish a baseline reading by taking a reading in an area you know to be unaffected, then take a reading in the affected area and compare the two readings. Copyright 2014, Delmhorst Instrument Co. Page 11 of 17 GlobalTestSupply www. -
Page 12: Testing Drywall
This will display a relative reading that ranges between 0 and 300. Remember to establish a baseline reading by taking a reading in an area you know to be unaffected, then take a reading in the affected area and compare the two readings. Copyright 2014, Delmhorst Instrument Co. Page 12 of 17 GlobalTestSupply www. -
Page 13: Care Of Your Meter
Keep cleaner out of the external connector. Remove the battery if the meter will not to be used for one month or longer. Copyright 2014, Delmhorst Instrument Co. Page 13 of 17 GlobalTestSupply www. -
Page 14: Service For Your Meter
WARRANTY Delmhorst Instrument Co., referred to hereafter as Delmhorst, guarantees the QuickNav meter for one year from date of purchase and any optional electrodes against defects in material or workmanship for 90 days. If, within the warranty period of the Model QuickNav, you find any defect in material or workmanship, return the meter following the instructions in the “Service for... -
Page 15: Species Correction Table
15.5 17.5 19.5 25.5 PINE, SHORTLEAF 15.5 17.5 19.5 21.5 23.5 PINE, SO. YELLOW* 10.5 14.5 16.5 PINE, SUGAR PINE, WHITE 25.5 Copyright 2014, Delmhorst Instrument Co. Page 16 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com... - Page 16 **SPF correction based on 2-pin 26-E reading with insulated pins. It is based on USDA/Forintek data and can be used for the following species: Lodgepole Pine Alpine Fir Copyright 2014, Delmhorst Instrument Co. Page 17 of 17 GlobalTestSupply www. .com Find Quality Products Online at: sales@GlobalTestSupply.com...
Need help?
Do you have a question about the QuickNav 12545 and is the answer not in the manual?
Questions and answers