Features; Specifications - RIDGID R7120 Operator's Manual

FEATURES

SPECIFICATIONS

Chuck ................................................................................................................................................... 1/2 in. (13mm), Keyed
Switch ............................................................................................................................................... Single Speed/Reversible
No Load Speed .......................................................................................................................................................... 500/min.
Input ............................................................................................................................... 120 Volts, 60 Hz, AC only, 7.5 Amps
Net Weight ...................................................................................................................................................... 8.1 lbs. (3.7 kg)
Before using this tool, familiarize yourself with all operating
features and safety requirements. However, do not let famil-
iarity with the tool make you careless.
This new drill is equipped with the following features. See
Figure 1.
SINGLE SPEED REVERSIBLE SWITCH
This drill has a single speed rocker-type switch. The switch
is reversible for changing the direction of rotation.
LOCK-ON BUTTON
This tool is equipped with a lock-on feature for continuous
drilling.
AUXILIARY HANDLE
This drill is equipped with a three-position auxiliary handle
for ease of operation and to prevent loss of control.
SPADE HANDLE
This drill is equipped with a two-position rear spade handle
for control tailored to the project.
POWER CORD
This tool has a 12 foot power cord with a built-in cord wrap.
EXTERNALLY ACCESSIBLE BRUSHES
Externally accessible brushes extend the life of the machine.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
7