Rx12 Connector Assignments; Single Analog Channel Out Of One Ta5; Two Analog Channels Out Of One Ta5; Aes Digital Out Of Ta5 - Zaxcom RX-12 User Manual

Zaxcom RX12

RX12 Connector Assignments

Single Analog Channel out of one TA5

Two Analog Channels out of one TA5

AES Digital out of TA5

Please note while sending digital output, it is necessary that the unit on the other end (recorder, mixer, etc.)
have digital inputs with sample rate convertors, as there is no way to synchronize the output data with the
recorder's digital input.
DC power in (Hirose HR10A-7P 4 Pin Male)
TA5 out on
RX-12
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
TA5 Out on
RX-12
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
TA5 out on
RX-12
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
DC Power
Source
Negative (Ground)
No Connection
No Connection
Positive
XLR into
Mixer
PIN 1 (Ground)
PIN 2 ( + )
PIN 3 ( )
–
No Connection
No Connection
XLR into
Mixer
PIN 1 XLRs
on both
PIN 2 - Left ( + )
PIN 3 - Left ( )
–
PIN 2 - Right ( + )
PIN 3 - Right ( )
–
Into
Mixer
Ground
AES 1/2
AES 1/2
AES 3/4
AES 3/4
Hirose
4 - Pin
PIN 1
PIN 2
PIN 3
PIN 4
15
Pin Configuration