Getting Started; Setting Up - Panasonic KX-TG885SK Quick Manual

Getting Started

Setting up

Connections
R If you do not connect the telephone line
cord and use only cellular lines, set the
cellular line only mode to use this unit more
conveniently (page 13).
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
4
1
2
For assistance, please visit http://shop.panasonic.com/support
8
3
4
5
n Charger
Connect the AC adaptor to the power
outlet.
Battery installation
R USE ONLY rechargeable Ni-MH batteries
1
AAA (R03) size (
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
1
4
2
R Follow the directions on the display to set
up the unit.
1
).
, ).
3
1