Useful Information; Frequently Asked Questions - Panasonic KX-TG885SK Quick Manual

Useful Information

Frequently asked questions

If you still have difficulties after following the instructions in this section, disconnect the base unit's
AC adaptor, then reconnect the base unit's AC adaptor. Remove the batteries from the handset,
and then insert them into the handset again.
Question
Why is displayed?
"Main unit no
power" or "No link."
is displayed. How do I
remove this message
from the display?
Time on the unit has
shifted.
Why am I unable to pair
a cellular phone to the
base unit?
No sound/noisy sound
while talking via cellular
line (Link to cell).
How can I increase the
handset volume level?
For assistance, please visit http://shop.panasonic.com/support
18
Cause/solution
R The handset is too far from the base unit. Move closer.
R The base unit's AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it.
1. Handset: MMENUN#130
2. Handset: MbN: "Panasonic DECT" a MSELECTN
3. Base unit: Press and hold MLOCATORN for about 5
seconds.
4. Handset: Press MOKN, then wait until a long beep sounds.
R Confirm the base unit's AC adaptor is connected to the unit and
the power outlet correctly.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit's AC adaptor to reset the unit. Reconnect
the adaptor and try again.
R The unit automatically adjusts the date and time each time
caller information including date and time is received (Caller ID
subscribers only). To adjust the time, wait for an incoming call.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to "Manual" (this will turn
automatic adjust off).
Handset:
1. MMENUN#226
2. MbN: Select the desired setting. a MSAVEN a MOFFN
R Depending on the compatibility of the cellular phone, you may
not be able to pair it to the base unit. For more information,
please visit
http://shop.panasonic.com/bluetooth-phone
R Confirm that the Bluetooth feature of your cellular phone is
turned on. You may need to turn this feature on depending on
your cellular phone.
R Your cellular phone does not work in HD voice properly.
Change voice quality mode from "Enhanced" (HD Voice) to
"Normal" using the following method.
Handset:
1. MMENUN#601
2. MbN: "Normal" a MSAVEN
R Press the volume key MDN repeatedly while talking.