Instruction Manual - Makita DUR364L Instruction Manual

ENGLISH (Original instructions)
SPECIFICATIONS
Model
Type of handle
No load speed
Overall length
Nylon cord diameter
Applicable cutting tool
Cutting blade diameter
Rated voltage
Net weight
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Nylon cutting head
Plastic blade
Vibration
Nylon cutting head
Plastic blade
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Nylon cutting head Plastic blade
(P/N 197297-1) (P/N 197188-6)
350 mm 255 mm
4.0 kg
BL1815N / BL1820 / BL1820B
Sound pressure
level average
L (dB (A)) L
PA WA
81
83
Left hand
2
a (m/s ) Uncertainty K
h,W
2
(m/s )
≤ 2.5 1.5
≤ 2.5 1.5
15m(50 )
FT
6 ENGLISH
DUR364L
Loop handle
-1
5,000 / 6,500 min
1,754 mm
2.0 – 2.4 mm
Nylon cutting head
(P/N 197297-1)
350 mm
D.C. 36 V
3.9 kg 4.5 kg
BL1830 / BL1830B / BL1840 / BL1840B /
BL1850 / BL1850B / BL1860B
Sound power level average
(dB (A)) Uncertainty K (dB (A))
89 0.3
92 0.3
Right hand
2
a (m/s ) Uncertainty K
h,W
≤ 2.5
≤ 2.5
Take particular care and attention.
Read instruction manual.
Danger; be aware of thrown objects.
The distance between the tool and
bystanders must be at least 15 m.
Keep bystanders away.
Keep distance at least 15 m.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not expose to moisture.
Plastic blade
(P/N 197188-6)
255 mm
4.4 kg
Applicable
standard
2000/14/EC
Applicable
standard
2
(m/s )
1.5 EN50636-2-91
1.5