Connection To External Time Signal - Max ER-2700 Instruction Manual

CONNECTION TO EXTERNAL TIME SIGNAL

Disconnect a power plug before connecting to an external time signal.
ER-2700 has a relay contact output.
An external bell, buzzer or chime, which are operated in the following methods, is useable.
(Contact capacity: 5A 30V DC)
Procedure
1. Disconnect a power plug. Remove screw and an
attached wall mounting plate as illustrated.
2. Connect a wire to a terminal block using a screwdriver
as illustrated.
In case of connection is made to a chime, etc. using
ER-2700 as a contact.
3. Take out wires through the takeout port as illustrated
and attach the wall mounting plate to body.
WARNING
- 21 -
External
time signal