Setting Mode 2 (Year, Month, Date, Hour, And Minute); Setting Mode 3; Holiday (Code 01) - Max ER-2700 Instruction Manual

SETTING MODE 2 (YEAR, MONTH, DATE, HOUR, AND
MINUTE)
Press "MODE 2" key after pressing the "CANCEL" key for 3sec. or more.
If password has been set up, enter the password before into the setting mode.
[Example] 1:35 (PM), 21st May, 2013
Press "MODE2" key.
Current Year is shown on the display.
Press to display the Month/Date.
Press to blink the Date.
Press or until the display shows "21."
Press to display the Hour/Minute.
Press to blink the Minute.
Press or until the display shows "35."
Press the "SET" key to register the changed data.
The display returns to the start of setting mode.
1. symbol appears during Daylight Saving Time activates.
2. In Europe, set Date first and Month second.
3. Clock starts at "00" seconds when the "SET" key is pressed.

SETTING MODE 3

Press "MODE 3" key after pressing the "CANCEL" key for 3sec. or more.
If password has been set up, enter the password before into the setting mode.

HOLIDAY (CODE 01)

Set a day of the week as "Holiday." Press the following keys to light on/off the day of the week.
The days of weeks that are lit up mean "Holiday."
◆ Initial data=Nothing (All days are lit off.)
Key
Day of
SUN MON
the week
1. Times on Holidays are printed in red color without any symbols.
2. Daily Total Hours on Holiday does not correspond to IN/OUT program in MODE 3.
Procedure [MODE 2]
TUE WED THU
ALL days are
FRI SAT
lit on.
- 14 -
Display
ALL days are
lit off.