Setting Mode 1; Machine Mode 1 (Code 01); Machine Mode 2 (Code 02) - Max ER-2700 Instruction Manual

SETTING MODE 1

Press "MODE 1" key after pressing the "CANCEL" key for 3sec. or more.
If password has been set up, enter the password before into the setting mode.

MACHINE MODE 1 (CODE 01)

Press or to select a desired number from the following table and set "Capacity of Employees."
According to the number, each function will be activated.
◆ Initial data=1
Capacity of
Number
Employees
1 60
2 130
3 150
1. When selecting "1," you cannot use "IN3" and "OUT3" external keys.
When pressing these keys, "E-90" appears on the display.
2. When selecting "2," you cannot use "IN3," "OUT3" and "Next Day Over-
time(

MACHINE MODE 2 (CODE 02)

Press or to select a desired number from the following table and set "12/24-Hour Format"
and "Pay Period."
◆ Initial data=1
Number
1
2
3
4
5
6
1. The time is printed only in 24-hour format.
2. When setting in the "Laid Down Position," only 24-hour format is displayed.
Function
Daily Total Hours
Use
Use
Not use
)" keys. When pressing these keys, "E-90" appears on the display.
12/24-Hour Format
12H
24H
12H
24H
12H
24H
Printed result on Time Card
th
Next Day Overtime 5
Daily Total
Use
Daily Total
Not use
Use
Pay Period
Monthly
Weekly
Bi-weekly
- 10 -
th
column 6 column
Accumulation of
Hours Daily Total Hours
Accumulation of
Hours Daily Total Hours
Time
Time