Max ER-2700 Instruction Manual page 20

CONNECTING TIME LENGTH (CODE 02)
Set "CONNECTING TIME LENGTH" for external output. ER-2700 can control connecting time length to external
bell, buzzer or chime.
Press or to select the desired connecting time length up to 60sec.
◆ Initial data= 10 sec.
1. ER-2700 can control connecting time length to external bell from 1 to 60 seconds
by 1second.
Example
Connecting Time Length=15 seconds
Press or
until the display shows "15."
Press to display CODE 03 as the next setting item.
EXTERNAL TIME SIGNAL (CODE 03 to 24)
Set the time and the day of the week to connect to external bell, buzzer or chime.
After setting the time, select the day of the week.
ER-2700 can set "External Time Signal" up to 22 times.
◆ Initial data: Time=- - : - - The day of the week=All days
Key
Day of
SUN MON
the week
Example
Time=AM9:00, The day of the week=Mon, Tue, Wed, Thu, Fri
Press or
until the display shows "9."
Press to move the cursor to set the minute.
Press or
until the display shows "00."
Press to move the cursor to set the day of the week.
Press and
Press to display CODE 03 to set the next time and the day of
the week of Time Signal.
Procedure
TUE WED THU
Procedure
key to light off "SUN" and "SAT."
(Connecting Time Length to the External Bell)
ALL days are
FRI SAT
lit on.
- 19 -
Display
ALL days are
lit off.
Display