Mitsubishi Electric ANS-Q-LARGE-U User Manual page 23

(2) Q series large type base unit (AnS series size)
(DIN rail mounting type)
5) 1)
2)
7)
No. Name
1) Extension cable
2) Base cover
3) Module connector
4) Module fixing screw hole
5) End fitting L
6) End fitting R
Fixing bracket for terminal
7)
block conversion adapter
Terminal block conversion
8)
adapter fixing hole
DIN rail adapter installation
9)
hole
3)
8)
Connector for connecting an extension cable (for
signal communications with the extension base unit)
Protective cover of extension cable connector
Connector for mounting power supply module, CPU
module, Q series large type I/O module, and
MELSEC-Q series module
Screw hole for fixing a module to the base unit
(screw size: M3
End stop bracket for fixing a module to the base unit.
End fitting L is engraved with "L" and end fitting R is
engraved with "R".
Bracket for fixing a terminal block conversion adapter
Screw hole for fixing a terminal block conversion
adapter (screw size: M3
Hole for installing a DIN rail adapter
16
4)
9)
Description
×
12)
×
8)
6)