Advertisement
The external GPS antenna can be connected into the GPS ANT socket,
which is essential when the control unit is stealth installed or if the
windshield is metallised and blocks the GPS signals. In the latter case,
the external GPS antenna can be installed behind the front bumper
as well.
With the PWR/VOL knob, you can adjust the volume and turn the
device off.
With the USB cable that comes with the device, you can update the
software version, the database and the language packs of the GPS.
Updates and instructions are available on the official website of the
manufacturer.
e) Turning the Detector on
The device turns on when igniting the engine and starts searching
for the connection with the GPS satellites. This
is displayed
on the screen of the device, once it is connected, the inscription
will disappear and the device is operational. When the vehicle is
stopped, the detector shows the current time and when it is moving,
the current speed is displayed. When a camera is detected, the device
signals to the driver in the selected language and displays the current
distance to the speed trap
The time for finding the GPS signals for the first time may vary de-
pending on weather conditions, like the humidity of the air and the
temperature. In cities, signals reflected from certain objects may also
extend the searching time.
Upon driving in tunnels or near tall buildings, the device may lose
the connection with the satellites and display the
text again,
but it will reconnect in time.
7
Advertisement
