Advertisement
c) Functions of the GPS Detector
1 Smart Radar Mute (mute based on speed) (default: 50)
The Radar Smart Mute function reduces the number of false alarms, if
a Radar Detector Module is connected to the GPS Detector. With active
GPS connection, the device will only give warnings when the driver goes
faster then the previously set speed limit.
Display
2 Smart Laser Mute (Default: OFF)
The Smart Laser Mute function reduces the number of false alarms, if a
Laser Detector Module is connected to the GPS Detector. With active GPS
connection, the device will only give warnings when the driver goes faster
then the previously set speed limit.
Display
3 Speeding alarm (Default: ON)
The GPS detector monitors the speed of the vehicle when it is approaching
a speed trap. When this function is enabled, the device will automatically
give warnings in case of speeding, even if the driver exceeds the limit
with only 1 km/h. In this menu, you can enable or disable this function,
furthermore, you can set the minimal limit after which the device will
give the warnings.
Speed limit: 10-100 km/h (6,21-62,14 mph)
Turing the Smart Mute function off.
City mode: reduced radar signal detection.
Speed limit: 10-100 km/h (6,21-62,14 mph)
Turing the Smart Mute function off.
10
Function
Function
Advertisement
