Advertisement
• A previously added User Coordinate can be deleted in two
ways. The first option is when you are closing to the saved
coordinate, wait until the device warns you and then press the
MODE button to remove the given coordinate. The device will
state if the coordinate had been successfully removed. This
function works only with active GPS connection and above
10 km/h (6.21 mph). All of the saved User Coordinates can
be deleted in the FACTORY RESET menu.
3) Enabling and disabling functions in Settings.
4) By pressing and holding the MODE button for 4 seconds, the
Radar Detector module can be turned on or off. A displayed text
and a beeping sound indicates the activation and deactivation.
b) Functions of the GPS Detector
The different functions of the GPS detector can be modified in the
menu system, with the MENU and MODE buttons.
Upon some software updates, certain points of the menu system
may change. For the proper use of the device, always use the manual
from our homepage.
WARNING!
9
Advertisement
