GW Instek GRS-6052A User Manual

Declaration of Conformity
We
GRS-6052A, GRS-6032A
are herewith confirmed to comply with the requirements set out in the Council Directive on
the Approximation of the Law of Member States relating to Electromagnetic Compatibility
(89/336/EEC, 92/31/EEC, 93/68/EEC) and Low Voltage Equipment Directive
(73/23/EEC, 93/68/EEC).
For the evaluation regarding the Electromagnetic Compatibility and Low Voltage
Equipment Directive, the following standards were applied:
◎ EMC
EN 61326-1: Electrical equipment for measurement, control and laboratory use -- EMC
requirements (1997+A1: 1998)
Conducted and Radiated Emission
EN 55011: 1998 Group I class A
Current Harmonic
IEC 61000-3-2: 1995
Voltage Fluctuation
IEC 61000-3-3: 1994
-------------------------
-------------------------
-------------------------
-------------------------
◎ Safety
Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC
Safety Requirements
IEC/EN 61010-1:2001
Electrostatic Discharge
IEC 61000-4-2: 1995
Radiated Immunity
IEC 61000-4-3: 1995
Electrical Fast Transients
IEC 61000-4-4: 1995
Surge Immunity
IEC 61000-4-5: 1995
Conducted Susceptibility
IEC 61000-4-6: 1996
Power Frequency Magnetic Field
IEC 61000-4-8: 1993
Voltage Dips/ Interrupts
IEC 61000-4-11: 1994
i
GRS-6052A/6032A OSCILLOSCOPE
CONTENTS
1. PRODUCT INTRODUCTION.................................................
1-1.Description.......................................................
1-2.Feature.............................................................
2. TECHNICAL SPECIFICATIONS.............................. 5
3. PRECAUTIONS BEFORE OPERATION......................
3-1.Unpacking the Oscilloscope...................................
3-2.Checking the Line Voltage.....................................
3-3.Environment.....................................................
3-4.Equipment Installation and Operation......................
3-5.CRT Intensity...................................................
3-6.Withstanding Voltage of Input Terminals..................
4. PANEL INTRODUCTION.........................................
4-1.Front Panel.......................................................
4-2.Rear Panel........................................................
5. OPERATION METHOD...........................................
5-1.Readout Display..................................................
5-2.Connecting Input Signals......................................
5-3.Adjustment and Checks.......................................
5-4.Function Check..................................................
5-5.Basic Operation...................................................
5-6.Digital Storage Functions......................................
5-7.Measurement Application.....................................
5-8.RS-232 Interface Remote Control...........................
6. MAINTENANCE...................................................
6-1.Fuse Replacement...............................................
6-2.Line Voltage Conversion.......................................
6-3.Cleaning..........................................................
7. BLOCK DIAGRAM................................................ 96
USER MANUAL
PAGE
1
1
2
9
9
9
10
10
10
10
11
13
32
34
34
37
38
40
42
51
60
62
94
94
94
95
⎯ ⎯
i