The Notebook Cannot Be Started; The Notebook Stops Working; The Printer Does Not Print - Fujitsu LIFEBOOK U938 Operating Manual

Troubleshooting and tips

The notebook cannot be started

Notebook
Cause
The battery is dead.
The power adapter is not connected correctly.

The notebook stops working

Notebook Energysaving mode
Cause
Notebook is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.

The printer does not print

Printer doesnotprint
Cause
The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
64
Troubleshooting
► Charge the battery.
or
► Connect the mains adapter to the
notebook.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Connect the mains adapter to the
notebook.
Troubleshooting
► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Fujitsu