The wireless connection to a network does not work
Thewireless connectiontoanetwork does notwork
Cause
The wireless component is disabled.
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
SmartCard reader is not recognised.
Cause
Chip card inserted incorrectly.
SmartCard PIN forgotten
Cause
PIN forgotten
SmartCard lost
Cause
SmartCard lost
Fujitsu
Troubleshooting
► Switch the wireless component on (see
"Switching the wireless components on and
off", Page
37).
► Check whether the wireless connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
Troubleshooting
► Make sure you have inserted your
SmartCard into the SmartCard reader
with the chip facing upwards/downwards
(device-dependent).
► Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
Troubleshooting
► If you are working in a network, contact your
system administrator, who can unlock your
system with a Supervisor PIN.
Troubleshooting
► If you are working in a network, contact your
system administrator, who can boot up your
notebook with a Supervisor SmartCard.
Troubleshooting and tips
65