The External Monitor Is Blank Or The Image Is Unstable; The Notebook Cannot Be Started - Fujitsu FPC04905BP Operating Manual

The external monitor is blank or the image is unstable

Monitor Screen
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.

The notebook cannot be started

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The power adapter is not connected correctly.
Fujitsu
Troubleshooting
► Terminate the application program in
Windows by pressing
fault persists after closing the program, use
the key combination for switching the screen
output (see "Key combinations", Page
switch over to the notebook's LCD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
Troubleshooting and tips
+ . If the
Alt F4
24) to
59