Overview
●
Junction box cotton pad
Junction box
rubber ring
Junction box upper cover
screws
Installation
●
(1)
1.Drill installation holes according to drawing paper,
then stuff into rubber stoppers。
(2)
2.Paste cotton pad onto the bottom of junction
box, then push the water-proof rubber ring onto the
upper body of junction box。
(3)
M20 Plastic Screw
(4)
Water-proof
(5)
KM4*10 threaded
(6)
3.Use 3pcs PWA4*25 self-tapping screws to fix
junction box body。
4.Use 3pcs KM4*10 threaded screws to fix
the upper cover with the junction box body。
5. Disassemble the dome base, put the
cotton pad onto the upper cover,then use
4pcs PM4*12 screws to fix the dome base
with the junction box。
6.Connect all cables and
put them into the junction
box ,
then install the
dome with the dome base
well, then use the dome
ring to fix。