Yamaha Royal Star Venture 2001 Assembly Manual page 33

Part to be tightened Part to be tightened
Rear fender side mold and rear fender stay
Main switch and frame
Sidestand bolt and nut
Footrest bracket and frame
Rear footrest and frame
Rear master cylinder and rear brake bracket
Rear master cylinder and brake hose joint
Brake hose joint and brake hose
Rear brake reservoir tank
Union bolt (rear brake hose)
Footrest bracket and rear brake bracket
Footrest bracket and shift rod bracket
Front wheel axle
Front wheel axle pinch bolt
Rear wheel axle nut
Front brake caliper
Rear brake caliper
Brake disc and wheel
Caliper bleed screw
NOTE:
1. First, tighten the ring nut approximately 52 Nm (5.2 mDkg, 37 ftDlb) by using the torque wrench, then loosen the ring
nut completely.
2. Retighten the ring nut to specification.
Tightening toque
Thread size Thread size
Nm
M8 23
M8 30
M12 122
M10 52
M8 23
M8 23
M10 30
M10 26
M6 4
M10 30
M8 23
M8 23
M18 78
M8 19
M18 150
M10 40
M10 40
M8 23
M8 6
–27–
Remarks Remarks
mDkg ftDlb
2.3 17
3.0 22
12.2 88
5.2 37
2.3 17
2.3 17
3.0 22
2.6 19
0.4 2.9
3.0 22
2.3 17
2.3 17
7.8 56
1.9 13
15.0 110
4.0 29
4.0 29
2.3 17
0.6 4.3