Overview; Figure 1-1, Front Panel Features - Magnum CSW1012 Owner's Manual

1.0

Overview

Congratulations on your purchase of the CSW1012 pure sine wave inverter
provided by Magnum Energy, Inc. This inverter is designed to be powerful,
yet simple to operate, and will provide you with reliable AC power for trouble-
free use. Please read this chapter to familiarize yourself with the features
and benefi ts of your CSW1012 inverter.
7

Figure 1-1, Front Panel Features

The front panel of the CSW1012 inverter is equipped with the following
features:
1. Status Indicator – an at-a-glance LED that provides the inverter's sta-
tus—lights green, red, or amber (see Section 4.0 Operation).
2. Digital Display – a three-character alphanumeric display that shows
the inverter's measured battery voltage, total AC output power, and any
error or warning codes.
3. Power/Select Button – a momentary button switch that allows the
inverter to be quickly turned on or off.
4. Remote Port – a RJ11 connector that allows an optional remote switch
to be connected via a remote cable. Note: Remote switch is sold sepa-
rately (PN:CSW-RS).
5. USB Port – allows USB-enabled devices to be powered and charged.
6. GFCI – a Ground Fault Circuit Interrupter protected AC outlet (with LED
indicator and test/reset capability). The GFCI outlet quickly stops the
fl ow of electricity in the event a ground fault occurs on the device that is
plugged into the inverter.
7. Serial Number – the unique identifi cation number assigned to each unit
(with a model-specifi c prefi x).
© 2013 Magnum Energy, Inc.
1.0 Introduction
1 2
6
3
5 4
1