Table of Contents
Advertisement
*
Use only DOT 3 brake fluid from a
sealed container.
*
Handle brake fluid with care because it
can damage paint and plastics as used
for instrument lenses and fairings.
*
Never aI/ow contaminants (dirt, water,
etc.) to enter the brake fluid reservoir.
Rear Brake Fluid Level:
Remove the reservoir cap, washer and
diaphragm. Whenever the level is lower
than the lower level mark (4) on the rear
reservoir, fill the reservoir with DOT 3
BRAKE FLUID from a sealed contaIner,
up to the upper level mark (3). Re.install
the diaphragm and washer, and tighten
the reservoir cap securely.
CAUTION:
*
Use only DOT 3 brake fluid from a
sealed container.
*
Handle brake fluid with care because it
can damage paint and electric wires.
*
Never aI/ow contaminants (dirt, water,
etc.) to enter the brake fluid reservoir.
(REAR)
(3) Upper level mark
(4) Lower level mark
63
Advertisement
Table of Contents
