Table of Contents
Advertisement
the gauge inserts easily, tighten the nuts
on the right axle holder to 3-4 kg-m
(22- 29 ft-lbs) starting with the forward
nuts.
6. If the feeler gauge cannot be inserted
easily, move the fork leg outward until
the gauge can be inserted and tighten
the holder nuts (4) with the gauge
inserted. After tightening, remove the
gauge.
(8) Feeler gauge
44
7. Check that the other three corners of
the caliper holder (6) have a clearance
of at least 0.7mm (0.028 in.) between
caliper holder and disc.
8. After installing the wheel, apply the
brakes several times and check for
free wheel rotation when released.
*
Failure to provide adequate disc to
caliper holder clearance may damage the
brake discs and impair braking efficien-
cy.
*
If a torque wrench was not used for
installation, see your authorized Honda
dealer as soon as possible to verify
proper assembly.
Advertisement
Table of Contents
