Prepare To Print - Ioline CrystalPress User Manual

32 Ioline CrystalPress User Guide
Produce the Motif (continued)

Prepare to Print

Press the Print/Pause key so the Status light
is red. Move the Transfer Sheet with Arrow
keys to position where the motif will start.
CrystalPress Ready
Press the Reset key on the Keypad to set the
beginning point for the motif. The Status
light will turn green.
Print Motif
Press the 'GO' button in CrystalStudio. The
CrystalPress will make the motif to match
what is displayed in CrystalStudio.
Transfer the Motif
Remove the Motif
When the motif is finished, lift the Pinch
Wheels then remove the motif from the
CrystalPress.
Check the Motif
Inspect the motif to ensure that no stones
were placed upside down or fell off during
the process of removal.
Pre-Heat the heat press
Set the heat press temperature and pres-
sure that is appropriate for the stone size
and material then turn on to pre-heat.
Pre-Heat the Material
Line the heat press Platen with a Protective
Sheet then place the material on the Platen.
Pre-heat the material for 5-10 seconds.
Position the Motif
Remove the cover sheet from the motif (if
used). Position the motif on the material
making sure adhesive side is down.
4
5
6
1
2
3
4
5