Step 4: Secure The Sorter Wheel; Step 5: Lock The Wiper Arm - Ioline CrystalPress User Manual

Step 4: Secure the Sorter Wheel

Insert the Thumbscrew through the top of the Sorter Wheel and into
the threaded hole in the sorter mechanism shaft. Tighten the Thumb-
screw only until snug. Do not over tighten.
Figure 16. Tighten the

Step 5: Lock the Wiper Arm

Rotate the Wiper Arm down into operating position. Turn the Wiper
Arm Clamp counter-clockwise until it stops to lock the Wiper Arm in
place.
Figure 17.
Rotate the
Sorter Wheel thumbscrew.
Wiper Arm into place then lock it down.
Operation
i
Note
The CrystalPress will not oper-
ate unless the Wiper Arm Clamp
is fully rotated into position.
The Sorter Bowl light will blink
and the Carriage will not move if
the Wiper Arm is not completely
locked in place with the Wiper
Arm Clamp.
17